微动摩擦学的发展现状与趋势

对微对摩擦学的发展过程和现状，包括微动磨损、微动腐蚀和微动疲劳作了相当系统耐简要的综合介绍与评论，重点归纳分析了近１０年来劝摩擦学的发展概况，并且分别就法国和国内有关研究工作作了集中评介。指出微动摩擦力学研究在发达国家的进展尤快，说明高科技的发展对这个学科领域研究要求的迫切性，应该引起我国摩擦学界和工程界科技工作者更多的关注，同时认为基础研究、工业应用研究和失效分析，都是微动摩擦学研究今后工作的重     

Molecular dynamics simulation of crack-tip processes in copper

The crack tip processes in copper under mode II loading have been simulated by a molecular dynamics method. The nucleation, emission, dislocation free zone (DFZ) and pile-up of the dislocations are analyzed by using a suitable atom lattice configuration and Finnis & Sinclair potential. The simulated results show that the dislocation emitted always exhibits a dissociated fashion. The stress intensity factor for dislocation nucleation, DFZ and dissociated width of partial dislocations are strongly dependent on the loading rate. The stress distributions are in agreement with the elasticity solution before the dislocation emission, but are not in agreement after the emission. The dislocation can move at subsonic wave speed (less than the shear wave speed) or at transonic speed (greater than the shear wave speed but less than the longitudinal wave speed), but at the longitudinal wave speed the atom lattice breaks down. The project supported by the National Natural Science Foundation of China     

含椭圆孔或裂纹的等参数正交异性板平面问题基本解

应用Ｃａｕｃｈｙ积分的方法，分别给出了含椭圆孔或裂纹的等参数正交异性板在任意面内集中载荷作用下的复应力函数基本解或应力强度因子基本解，这些基本解对于应用边界元法求解此类正交异性板或各向同性板的某些弹性力学和断裂力学问题具有重要的意义。     

穿透短裂纹扩展趋偏现象的模型分析和实验研究

本文揭示了穿透短裂纹疲劳扩展中的一个特性－趋偏扩展特性。这一特性是穿透短裂纹预测和测试中产生偏问题的根本原因。通过对长、短裂纹扩展特性及主要影响因素的分析，提出了进行穿透短裂纹试验时必须注意的若干事项。     

基于局域分析的疲劳短裂纹群体演化随机模型

采用局域裂纹数密度描述金属材料中不同局部区域的疲劳短裂纹群体损伤的发展情况通过考虑在不同局域存在的材料性质的随机涨落及局部损伤对损伤总量发展的影响，建立了局域裂纹数密度演化随机方程对方程数值求解从而模拟了材料的疲劳短裂纹损伤过程结果显示出主裂纹出现的随机性，并讨论了裂纹总数与最大裂纹尺度在统计意义上的演化特征     

A NEW METHOD TO DETERMINE THE R-CURVE OF CERAMICS-FRACTURE GRATING METHOD

The etching technique of the single-lined zero-thickness specimen grating is applied tothe surface of the SiC fiber toughening Si_3N_4 ceramic composite specimen.The position of the crackand the crack length during the process of crack extension when the load is applied and gradually in-creased can be determined by recording the output voltage value of the Wheatstone bridge in which theceramic specimen with the fracture grating on is located.The crack-growth-resistance(R-curve) of thismaterialis thus obtained.     

Localised knife waves in a structured interface

We consider a Mode III lattice with an interface layer where the dynamic crack growth is caused by a localised sinusoidal wave. In the wave–fracture scenario, the ‘feeding wave’ (here also called the knife wave) delivers energy to the moving crack front, while the dissipative waves carry a part of this energy away from the front. The questions addressed here are:

• What are the conditions of existence of the localised knife wave?

• What is the lower bound of the amplitude of the feeding wave, which supports the crack propagation, for a given deformational fracture criterion?

• How does the crack speed depend on the amplitude of the feeding wave?

• What are the dissipative waves? How much energy is irradiated by these waves and what is the total dissipation?

• What are the conditions of existence of the steady-state regime for the propagating crack?

We consider analytically two established regimes: the steady-state regime, where the motion of neighbouring masses (along the interface) differs only by a constant shift in time, and an alternating-strain regime, where the corresponding amplitudes differ by sign. We also present the numerical simulation results for a model of a high-contrast interface structure. Along with the energy of the feeding and dissipative waves, an energy radiated to the bulk of the lattice is identified.

A crack perpendicular to and terminating at a bimaterial interface

Using dislocation simulation approach, the basic equation for a finite crack perpendicular to and terminating at a bimaterial interface is formulated. A novel expansion method is proposed for solving the problem. The complete solution to the problem, including the explicit formulae for theT stresses ahead of the crack tip and the stress intensity factors are presented. The stress field characteristics are analysed in detail. It is found that normal stresses {ie27-1} and {ie27-2} ahead of the crack tip, are characterised byQ fields if the crack is within a stiff material and the parameters |p _T | and |q _T | are very small, whereQ is a generalised stress intensity factor for a crack normal to and terminating at the interface. If the crack is within a weak material, the normal stresses {ie27-3} and {ie27-4} are dominated by theQ field plusT stress. This work was supported by the Swedish Research Council for Engineering Sciences.     

两级载荷下复合材料层板疲劳与寿命预测

研究了复合材料层板疲劳过程中的累积应变演化规律，建立了以累积应变为基础的非线性积累损伤法则，实验结果表明：文中提出的累积应变方法能够较好地反映加载次序效应，准确地预测了复合材料层板在两级载荷下的疲劳寿命。